







DMX-LED-Dimmer X9HR
![]() |
The DMX-LED-Dimmer X9HR is especially designed for controlling RGB LED-Stripes.
The dimmer has 9 High-Resolution PWM-Outputs (3xRGB) independently controllable via DMX.
9 Outputs
The DMX-LED-Dimmer X9HR has 9 outputs to which LEDs can be connected.
All outputs are designed in the same way so single color, RGB or RGBW LEDs can be connected.
High Power Outputs
The outputs can drive a current up to 10A.
So it is possible to connect a maximum load of 120W (12V) / 240W (24V)
0% bis 100% dimmable
The connected LEDs are dimmed by PWM from 0% to 100%.
For voltages from 12V up to 24V
The DMX-LED-Dimmer X9HR operates with supply voltages from 12V up to 24V. The LED voltage can
be different per output so that one DMX-LED-Dimmer X9HR can control different LED systems.
DMX-FAIL Function
An adjustable DMX FAIL function offers the option to get in case of lost
DMX signal the current state (HOLD) or assuming a preset value.
DMX-Master Dimmer
Optionally, another DMX channel can be activated as Master Dimmer (all outputs)
or one master dimmer per RGB group. The global master dimmer is fixed at
DMX address 1 and can be used as system master dimmer.
Adjustable dimming curve
The dimming curves can be configured individually for each output.
RDM support
The DMX-LED-Dimmer X9HR allows configuration by RDM via DMX.
LED-State Display
The DMX state is indicated via the LED status.
Firmware-Update-Function
To use future functions, the DMX-LED-Dimmer X9HR offers a firmware update function.
Top hat rail housing available
The top-hat rail housing 1050 is available as accessory for the DMX-LED-Dimmer X9HR.
- MADE IN GERMANY -
![]() |
Power supply: | 7-24V DC |
80mA@12V / 100mA@24V (without connected LED load) | |
LED voltage: | 7-24V DC (no AC voltage !) |
Protocol: | DMX512 |
RDM | |
DMX channels: | 9 channels with 8Bit-controlling and LookUp-Table |
18 channels with 16Bit-controlling | |
+ optional Master-Dimmer-Channels | |
DMX-FAIL: | Hold / 0%-100% |
Output: | 9 PWM-signal with 16Bit-resolution |
Common supply voltage | |
Output current: | max. 10A each output |
In sum 90A with all GND connections | |
Output power: | 9x 120W (12V) / 9x 240W (24V) |
Masterdimmer: | None / Global / RGB / System |
PWM-Frequency: | 244 Hz / 2 kHz / 4 kHz |
Energy-Save output: | Control output for switching off the load power supply units |
StandAlone function: | 9 internal StandAlone programs |
Connections: | Screw terminals |
Dimensions: | 99mm x 82 mm |